Products
-
1071897 20" Hettich 5632 Full Extension Ball Bearing Drawer Slide
$15.50Full extension detachable ball bearing slide with 1/2" (12.7mm) installation width.- Telescopic precision full extension slide with pull-out stop and roll-out prevention.
- Load capacity 100 lbs (45kg).
- Drawer can be unlatched from the runner, making the drawer easy to remove and re-install.
- Smooth action and high lateral stability due to precision ball bearings.
- Minimum cabinet depth is at least 1/4" longer than the length of the slide/drawer box.
- Material: Chromated Steel
- SOLD IN PAIRS
-
1071896 18" Hettich 5632 Full Extension Ball Bearing Drawer Slide
$14.72Full extension detachable ball bearing slide with 1/2" (12.7mm) installation width.- Telescopic precision full extension slide with pull-out stop and roll-out prevention.
- Load capacity 100 lbs (45kg).
- Drawer can be unlatched from the runner, making the drawer easy to remove and re-install.
- Smooth action and high lateral stability due to precision ball bearings.
- Minimum cabinet depth is at least 1/4" longer than the length of the slide/drawer box.
- Material: Chromated Steel
- SOLD IN PAIRS
-
1071895 16" Hettich 5632 Full Extension Ball Bearing Drawer Slide
$13.78Full extension detachable ball bearing slide with 1/2" (12.7mm) installation width.- Telescopic precision full extension slide with pull-out stop and roll-out prevention.
- Load capacity 100 lbs (45kg).
- Drawer can be unlatched from the runner, making the drawer easy to remove and re-install.
- Smooth action and high lateral stability due to precision ball bearings.
- Minimum cabinet depth is at least 1/4" longer than the length of the slide/drawer box.
- Material: Chromated Steel
- SOLD IN PAIRS
-
1071894 14" Hettich 5632 Full Extension Ball Bearing Drawer Slide
$12.90Full extension detachable ball bearing slide with 1/2" (12.7mm) installation width.- Telescopic precision full extension slide with pull-out stop and roll-out prevention.
- Load capacity 100 lbs (45kg).
- Drawer can be unlatched from the runner, making the drawer easy to remove and re-install.
- Smooth action and high lateral stability due to precision ball bearings.
- Minimum cabinet depth is at least 1/4" longer than the length of the slide/drawer box.
- Material: Chromated Steel
- SOLD IN PAIRS
-
1071893 12" Hettich 5632 Full Extension Ball Bearing Drawer Slide
$12.06Full extension detachable ball bearing slide with 1/2" (12.7mm) installation width.- Telescopic precision full extension slide with pull-out stop and roll-out prevention.
- Load capacity 100 lbs (45kg).
- Drawer can be unlatched from the runner, making the drawer easy to remove and re-install.
- Smooth action and high lateral stability due to precision ball bearings.
- Minimum cabinet depth is at least 1/4" longer than the length of the slide/drawer box.
- Material: Chromated Steel
- SOLD IN PAIRS
-
1071891 10" Hettich 5632 Full Extension Ball Bearing Drawer Slide
$11.09Full extension detachable ball bearing slide with 1/2" (12.7mm) installation width.- Telescopic precision full extension slide with pull-out stop and roll-out prevention.
- Load capacity 100 lbs (45kg).
- Drawer can be unlatched from the runner, making the drawer easy to remove and re-install.
- Smooth action and high lateral stability due to precision ball bearings.
- Minimum cabinet depth is at least 1/4" longer than the length of the slide/drawer box.
- Material: Chromated Steel
- SOLD IN PAIRS
-
Flap Hinge, Brass Plated, 18 MM Overlay
$9.57Flap hinge permits drop front to travel 90 degrees to produce a surface flush with the cabinet bottom. Nickel color shown in photo.
Hinge parts are mounted separately in bottom panel and flap, enabling subsequent flap assembly.
Flaps are aligned through independent height, side, and depth adjustment.
Identical hole dimensions in bottom panel and flap. Three screw fasteners ensure firm and exact hinge seating in bottom panel and flap.
Hole edge break-out is hidden by covering lip. In open position, inside face edges of bottom panel and flap are flush before height adjustment.
Replacement for Part No. 9046482.
Learn More -
9008111 Clip-On 165 Degree Concealed Hinge – Half Overlay / Screw-On
$9.35Concealed wide-angle hinge, snap-on assembly, integrated door overlay and eccentric depth adjustment.- Opening angle 165 degrees - the opening angle can be variably adjusted down to 120 degrees with the optional adjustment screw (#079791). Cup diameter 35mm.
- The wide-angle hinge enables an optimal hairline reveal.
- Negative door protrusion
- Intermat 9956 hinges are snapped on to the mounting plate.
- Depth adjustment via cam -0.5/+3.5mm
- Height adjustment via mounting plate +2mm/-2mm
- Overlay adjustment +0.5mm/-3mm
-
045038 Clip-On Concealed Hinge for Corner Cabinet Bi-Fold Doors – Press-In
$8.82For corner cabinets with folding doors.- Concealed hinge, snap-on assembly, integrated door overlay and eccentric depth adjustment.
- Opening angle 50/90 degrees, cup diameter 35mm
- Intermat 9931 hinges are snapped on to the mounting plate
- Depth adjustment via cam -0.5mm/+3.5mm
- Height adjustment via mounting plate +2mm/-2mm
-
Flap Hinge, Nickel Plated, 18 mm Overlay
$7.88Flap hinge permits drop front to travel 90 degrees to produce a surface flush with the cabinet bottom.
Hinge parts are mounted separately in bottom panel and flap, enabling subsequent flap assembly.
Flaps are aligned through independent height, side, and depth adjustment.
Identical hole dimensions in bottom panel and flap. Three screw fasteners ensure firm and exact hinge seating in bottom panel and flap.
Hole edge break-out is hidden by covering lip. In open position, inside face edges of bottom panel and flap are flush before height adjustment.
Replacement for Part No. 9046480.
Learn More