Products
-
9046809 Clip-On 125 Degree Concealed Hinge – Half Overlay / Screw-On
$5.82Concealed hinge with snap-on assembly, integrated door overlay, and eccentric depth adjustment.- Opening angle 125 degrees, cup diameter 35mm
- Intermat 9944 hinges are snapped onto the mounting plate
- Depth adjustment via cam -0.5mm/+3.5mm
- Height adjustment via mounting plate +2mm/-2mm
- Overlay adjustment +0.5mm/-3mm
-
9046806 Clip-On 110 Degree Concealed Hinge – Half Overlay / Screw-On
$3.18Concealed hinge with snap-on assembly, integrated door overlay, and eccentric depth adjustment.- Opening angle 110 degrees, cup diameter 35mm
- Shallow hole depth for door thickness minimum of 15mm
- Intermat 9943 hinges are snapped onto the mounting plate
- Depth adjustment via cam -0.5mm/+3.5mm
- Height adjustment via mounting plate +2mm/-2mm
- Overlay adjustment +0.5mm/-3mm
-
9026839 Front Fixing Clip Set for Quadro IW21 Drawer Slides
$3.13Front fixing clip set for Quadro IW21 Undermount Full Extension Soft Closing Drawer Slides
Set contains:- 1 left front fixing clip
- 1 right front fixing clip
- 2 spacers for 1/2" (12mm) box thickness
-
9019660 28" Hettich 5632 Full Extension Ball Bearing Drawer Slide
$18.42Full extension detachable ball bearing slide with 1/2" (12.7mm) installation width.- Telescopic precision full extension slide with pull-out stop and roll-out prevention.
- Load capacity 100 lbs (45kg).
- Drawer can be unlatched from the runner, making the drawer easy to remove and re-install.
- Smooth action and high lateral stability due to precision ball bearings.
- Minimum cabinet depth is at least 1/4" longer than the length of the slide/drawer box.
- Material: Chromated Steel
- SOLD IN PAIRS
-
9015115 Screw-On Door Buffer Silent System for Hettich Intermat Hinges
$4.46Screw-on door buffer and soft-closing mechanism for Intermat and Ecomat hinges- For overlay doors (cranking 0 and 9.5mm), inset doors (cranking 16mm)
- A simple screw enables step-less adjustment of the cushioning function.
- Can be retrofitted to existing installations of approved Intermat and Ecomat hinges.
- Grey plastic
-
9015112 Clip-On Door Buffer Silent System for Hettich Intermat Hinges
$3.81Clip-on door buffer and soft-closing mechanism for Intermat and Ecomat hinges- For overlay doors (cranking 0 and 9.5mm), inset doors (cranking 16mm)
- A simple screw enables step-less adjustment of the cushioning function.
- Can be retrofitted to existing installations of approved Intermat and Ecomat hinges.
- Grey plastic
-
9008111 Clip-On 165 Degree Concealed Hinge – Half Overlay / Screw-On
$9.35Concealed wide-angle hinge, snap-on assembly, integrated door overlay and eccentric depth adjustment.- Opening angle 165 degrees - the opening angle can be variably adjusted down to 120 degrees with the optional adjustment screw (#079791). Cup diameter 35mm.
- The wide-angle hinge enables an optimal hairline reveal.
- Negative door protrusion
- Intermat 9956 hinges are snapped on to the mounting plate.
- Depth adjustment via cam -0.5/+3.5mm
- Height adjustment via mounting plate +2mm/-2mm
- Overlay adjustment +0.5mm/-3mm
-
1076819 Clip-On 165 Degree Concealed Hinge – Full Overlay / Screw-On
$5.19Concealed wide-angle hinge, snap-on assembly, integrated door overlay and eccentric depth adjustment.- Opening angle 165 degrees - the opening angle can be variably adjusted down to 120 degrees with the optional adjustment screw (#079791). Cup diameter 35mm.
- The wide-angle hinge enables an optimal hairline reveal.
- Negative door protrusion
- Intermat 9956 hinges are snapped on to the mounting plate.
- Depth adjustment via cam -0.5/+3.5mm
- Height adjustment via mounting plate +2mm/-2mm
- Overlay adjustment +0.5mm/-3mm
-
1076539 4.5mm Clip-On Mounting Plate – For Face Frame
$1.65For frame doors with overlay.- Hole distance 32mm
- With oblong holes for height adjustment of +/- 2mm
- Nickel-plated die-cast zinc
-
1076538 0mm Clip-On Mounting Plate – For Face Frame
$1.61- Hole distance 32mm
- Distance 0mm, Total Height 8.2mm
- For frame doors with overlay
- Oblong holes for height adjustment +/- 2mm
- Nickel-plated die-cast zinc